Main

APM.BAD_CYCLES - APMonitor Option

Main.OptionApmBadCycles History

Show minor edits - Show changes to output

June 08, 2017, at 11:14 PM by 10.5.113.159 -
Changed line 5 from:
%width=50px%Attach:apm.png
to:
%width=50px%Attach:apm.png [[Main/DbsGlobal|Global Options]] | %width=30px%Attach:fv.png %width=30px%Attach:mv.png %width=30px%Attach:sv.png %width=30px%Attach:cv.png[[Main/DbsVariable|Local Options]]
June 08, 2017, at 11:14 PM by 10.5.113.159 -
Changed lines 14-16 from:
BAD_CYCLES is a counter that increments when the application fails to produce a successful solution. When BAD_CYCLES reaches the [[Main/OptionApmAutoCold|AUTO_COLD]] limit, a [[Main/OptionApmColdstart|COLDSTART]] is initiated. Once a successful solution is found, [[Main/OptionApmColdstart|COLDSTART]] and [[Main/OptionApmBadCycles|BAD_CYCLES]] are set to zero.
to:
BAD_CYCLES is a counter that increments when the application fails to produce a successful solution. When BAD_CYCLES reaches the [[Main/OptionApmAutoCold|AUTO_COLD]] limit, a [[Main/OptionApmColdstart|COLDSTART]] is initiated. Once a successful solution is found, [[Main/OptionApmColdstart|COLDSTART]] and [[Main/OptionApmBadCycles|BAD_CYCLES]] are set to zero.

See also [[Main/OptionApmAutoCold|AUTO_COLD]], [[Main/OptionApmColdstart|COLDSTART]]
June 04, 2017, at 05:33 AM by 45.56.3.173 -
Changed line 14 from:
BAD_CYCLES is a counter that increments when the application fails to produce a successful solution. When BAD_CYCLES reaches the [[Main/OptionApmAutoCold|AUTOCOLD]] limit, a [[Main/OptionApmColdstart|COLDSTART]] is initiated. Once a successful solution is found, [[Main/OptionApmColdstart|COLDSTART]] and [[Main/OptionApmBadCycles|BAD_CYCLES]] are set to zero.
to:
BAD_CYCLES is a counter that increments when the application fails to produce a successful solution. When BAD_CYCLES reaches the [[Main/OptionApmAutoCold|AUTO_COLD]] limit, a [[Main/OptionApmColdstart|COLDSTART]] is initiated. Once a successful solution is found, [[Main/OptionApmColdstart|COLDSTART]] and [[Main/OptionApmBadCycles|BAD_CYCLES]] are set to zero.
June 04, 2017, at 05:33 AM by 45.56.3.173 -
Added lines 1-14:
(:title APM.BAD_CYCLES - APMonitor Option:)
(:keywords APM.BAD_CYCLES, Optimization, Estimation, Option, Configure, Default, Description:)
(:description Automatically cold start model after this specified number of bad cycles:)

%width=50px%Attach:apm.png

 Type: Integer, Input/Output
 Default Value: 0
 Description: Counter on number of bad cycles
              0  = initial value
              1+ = number of consecutive unsuccessful
                  solution attempts

BAD_CYCLES is a counter that increments when the application fails to produce a successful solution. When BAD_CYCLES reaches the [[Main/OptionApmAutoCold|AUTOCOLD]] limit, a [[Main/OptionApmColdstart|COLDSTART]] is initiated. Once a successful solution is found, [[Main/OptionApmColdstart|COLDSTART]] and [[Main/OptionApmBadCycles|BAD_CYCLES]] are set to zero.