Main

APM.CTRL_TIME - APMonitor Option

Main.OptionApmCtrlTime History

Hide minor edits - Show changes to markup

June 08, 2017, at 11:24 PM by 10.5.113.159 -
Changed lines 5-6 from:
to:
Added lines 12-13:
June 01, 2017, at 06:55 AM by 45.56.3.173 -
Added lines 1-11:

(:title APM.CTRL_TIME - APMonitor Option:) (:keywords APM.CTRL_TIME, Optimization, Estimation, Option, Configure, Default, Description:) (:description Time for each step in the control horizon:)

 Type: Floating Point, Input or Output (with CSV read)
 Default Value: 60
 Description: Time for each step in the control horizon

CTRL_TIME is the cycle time of the controller for real-time applications. The clock time trigger for initiating successive controller solutions should be synchronized with CTRL_TIME to avoid dynamic mismatch between the internal simulation time and the process measurements. When CSV_READ is on and the horizon time points are specified from the data file, the CTRL_TIME and PRED_TIME are set equal to the time increment of the first time step.