APM.CV_WGT_SLOPE - APMonitor Option

Main.OptionApmCvWgtSlope History

Hide minor edits - Show changes to markup

June 09, 2017, at 12:23 AM by 10.5.113.159 -
Changed line 15 from:

See also CV_WGT_START, TR_INIT, TR_OPEN

to:

See also CV_WGT_START, MV_DCOST_SLOPE, TR_INIT, TR_OPEN

Restore
June 08, 2017, at 11:33 PM by 10.5.113.159 -
Changed lines 5-6 from:
to:
Global Options | Local Options
Added lines 14-15:

See also CV_WGT_START, TR_INIT, TR_OPEN

Restore
June 01, 2017, at 07:00 AM by 45.56.3.173 -
Changed lines 9-11 from:
 Description: Slope for weight on future CV error (e.g. [+] favors steady state)
to:
 Description: Slope for weight on future CV error
              [+] favors steady state trajectory target
              [-] favors near term trajectory target
Restore
June 01, 2017, at 06:59 AM by 45.56.3.173 -
Added lines 1-11:

(:title APM.CV_WGT_SLOPE - APMonitor Option:) (:keywords APM.CV_WGT_SLOPE, Optimization, Estimation, Option, Configure, Default, Description:) (:description Slope for weight on future CV error (e.g. [+] favors steady state):) 

 Type: Floating Point, Input
 Default Value: 0.0
 Description: Slope for weight on future CV error (e.g. [+] favors steady state)

CV_WGT_SLOPE is how the controlled variable WSPHI, WSPLO, or WSP change with time over the control horizon. This option is used to favor either near-term attainment of the setpoint or long-term (future) steady state tracking. It is normally set to zero but can be adjusted to be positive to increase the weighting for future time points or negative to decrease the weighting for future time points.

Restore