Main

APM.CV_WGT_START - APMonitor Option

Main.OptionApmCvWgtStart History

Hide minor edits - Show changes to output

June 09, 2017, at 12:23 AM by 10.5.113.159 -
Changed line 14 from:
See also [[Main/OptionApmCvWgtSlope|CV_WGT_SLOPE]], [[Main/OptionTrInit|TR_INIT]], [[Main/OptionTrOpen|TR_OPEN]]
to:
See also [[Main/OptionApmCvWgtSlope|CV_WGT_SLOPE]], [[Main/OptionApmMvDcostSlope|MV_DCOST_SLOPE]], [[Main/OptionTrInit|TR_INIT]], [[Main/OptionTrOpen|TR_OPEN]]
June 08, 2017, at 11:34 PM by 10.5.113.159 -
Changed line 14 from:
See also [[Main/OptionApmCvWgtInit|CV_WGT_INIT]], [[Main/OptionTrInit|TR_INIT]], [[Main/OptionTrOpen|TR_OPEN]]
to:
See also [[Main/OptionApmCvWgtSlope|CV_WGT_SLOPE]], [[Main/OptionTrInit|TR_INIT]], [[Main/OptionTrOpen|TR_OPEN]]
June 08, 2017, at 11:34 PM by 10.5.113.159 -
Changed lines 5-6 from:
%width=50px%Attach:apm.png
to:
%width=50px%Attach:apm.png [[Main/DbsGlobal|Global Options]] | %width=30px%Attach:fv.png %width=30px%Attach:mv.png %width=30px%Attach:sv.png %width=30px%Attach:cv.png[[Main/DbsVariable|Local Options]]
Added lines 13-14:

See also [[Main/OptionApmCvWgtInit|CV_WGT_INIT]], [[Main/OptionTrInit|TR_INIT]], [[Main/OptionTrOpen|TR_OPEN]]
June 01, 2017, at 07:01 AM by 45.56.3.173 -
Changed lines 9-10 from:
 Description: Start interval for controlled variable error model weights
to:
 Description: Start interval for controlled variable error
             model weights
June 01, 2017, at 07:00 AM by 45.56.3.173 -
Added lines 1-11:
(:title APM.CV_WGT_START - APMonitor Option:)
(:keywords APM.CV_WGT_START, Optimization, Estimation, Option, Configure, Default, Description:)
(:description Start interval for controlled variable error model weights:)

%width=50px%Attach:apm.png

 Type: Integer, Input
 Default Value: 0
 Description: Start interval for controlled variable error model weights

CV_WGT_START is the time step that the controlled variables WSPHI, WSPLO, or WSP start. Before this time step, there is no penalty so that there are no near term objectives to reach a setpoint or trajectory. This option is used to consider long-term (future) steady state tracking while ignoring the near-term path to achieve the final target. It is normally set to zero but can be adjusted to be any positive integer between 0 and the number of time steps in the horizon.