From APMonitor Documentation

Main: APM.CYCLECOUNT - APMonitor Option

Global Options | Local Options
 Type: Integer, Input with Output (+1)
 Default Value: 0
 Description: Cycle count, increments every cycle

CYCLECOUNT is a counter that records the number of cycles of the application. It is both an input and output value because the CYCLECOUNT value can be reset. The CYCLECOUNT may be reset when it is desirable to record when a certain event occurs such as a set point change or when the application is re-initialized.

See also BAD_CYCLES

Retrieved from http://www.apmonitor.com/wiki/index.php/Main/OptionApmCyclecount
Page last modified on June 08, 2017, at 11:36 PM