Main

DPRED - APMonitor Option

Main.OptionDpred History

Show minor edits - Show changes to output

June 08, 2017, at 10:32 PM by 10.5.113.159 -
Changed line 11 from:
Changes in the manipulated variables (MVs) are listed for the first 10 steps of the horizon including DPRED[1], DPRED[2], etc. Values of zero indicate that there are no changes. With REQCTRLMODE=1 (COLD), all DPRED values are zero. With REQCTRLMODE=2 (WARM), only DPRED[1] is required to be zero but the other segments may be non-zero. With REQCTRLMODE=3 (CONTROL), the first DPRED value is changing.
to:
Changes in the manipulated variables (MVs) are listed for the first 10 steps of the horizon including DPRED[1], DPRED[2], etc. Values of zero indicate that there are no changes. With REQCTRLMODE=1 (COLD), all DPRED values are zero. With [[Main/OptionApmReqctrlmode|REQCTRLMODE]]=2 (WARM), only DPRED[1] is required to be zero but the other segments may be non-zero. With [[Main/OptionApmReqctrlmode|REQCTRLMODE]]=3 (CONTROL), the first DPRED value is changing.
June 08, 2017, at 10:31 PM by 10.5.113.159 -
Changed lines 5-6 from:
%width=50px%Attach:mv.png 
to:
%width=50px%Attach:mv.png [[Main/DbsVariable|Local Options]] | %width=30px%Attach:apm.png [[Main/DbsGlobal|Global Options]]
Changed line 9 from:
 Description: Delta prediction changes for each step'
to:
 Description: Delta prediction changes for each step
June 01, 2017, at 06:23 AM by 45.56.3.173 -
Added lines 1-11:
(:title DPRED - APMonitor Option:)
(:keywords DPRED, Optimization, Estimation, Option, Configure, Default, Description:)
(:description Delta prediction changes for each step':)

%width=50px%Attach:mv.png 

 Type: Floating Point, Output
 Default Value: 0.0
 Description: Delta prediction changes for each step'

Changes in the manipulated variables (MVs) are listed for the first 10 steps of the horizon including DPRED[1], DPRED[2], etc. Values of zero indicate that there are no changes. With REQCTRLMODE=1 (COLD), all DPRED values are zero. With REQCTRLMODE=2 (WARM), only DPRED[1] is required to be zero but the other segments may be non-zero. With REQCTRLMODE=3 (CONTROL), the first DPRED value is changing.