Main

FDELAY - APMonitor Option

Main.OptionFdelay History

Hide minor edits - Show changes to markup

June 08, 2017, at 10:33 PM by 10.5.113.159 -
Changed line 5 from:
to:
June 01, 2017, at 06:25 AM by 45.56.3.173 -
Changed lines 9-11 from:
 Description: Feedback delay: 0=No Delay, >=1 horizon steps for delay
to:
 Description: Feedback delay
              0=No Delay
              >=1 horizon steps for delay
June 01, 2017, at 06:24 AM by 45.56.3.173 -
Added lines 1-11:

(:title FDELAY - APMonitor Option:) (:keywords FDELAY, Optimization, Estimation, Option, Configure, Default, Description:) (:description Feedback delay: 0=No Delay, >=1 horizon steps for delay:)

 Type: Integer, Input
 Default Value: 0
 Description: Feedback delay: 0=No Delay, >=1 horizon steps for delay

The feedback delay places the measurement at the appropriate point in the horizon for dynamic estimation. Typical examples are laboratory measurement or gas chromatographs that report measurements that were taken in the past, usually with a 10 min - 2 hour delay. When the new value is reported, it should be placed at the appropriate point in the data time horizon. FDELAY is the number of horizon steps in the past where the measurement was actually taken.