Main

NEWVAL - APMonitor Option

Main.OptionNewval History

Hide minor edits - Show changes to output

June 08, 2017, at 10:35 PM by 10.5.113.159 -
Changed line 5 from:
%width=50px%Attach:fv.png  %width=50px%Attach:mv.png 
to:
%width=50px%Attach:fv.png  %width=50px%Attach:mv.png [[Main/DbsVariable|Local Options]] | %width=30px%Attach:apm.png [[Main/DbsGlobal|Global Options]] 
June 01, 2017, at 06:30 AM by 45.56.3.173 -
Changed lines 9-10 from:
 Description: New value implemented by the estimator or controller (NEWVAL = MEAS when not in control)
to:
 Description: New value implemented by the estimator or 
           
controller (NEWVAL = MEAS when not in control)
June 01, 2017, at 06:30 AM by 45.56.3.173 -
Added lines 1-11:
(:title NEWVAL - APMonitor Option:)
(:keywords NEWVAL, Optimization, Estimation, Option, Configure, Default, Description:)
(:description New value implemented by the estimator or controller (NEWVAL = MEAS when not in control):)

%width=50px%Attach:fv.png  %width=50px%Attach:mv.png 

 Type: Floating Point, Output
 Default Value: 1.0
 Description: New value implemented by the estimator or controller (NEWVAL = MEAS when not in control)

The new value of the parameter estimate (FV) or manipulated variable (MV). This value is taken from the first step of the controller or the last step of the estimator. The NEWVAL is set equal to the measured value if the FV or MV status is off and the FSTATUS (feedback status) is ON (1).