Main

NXTVAL - APMonitor Option

Main.OptionNxtval History

Show minor edits - Show changes to markup

June 08, 2017, at 10:36 PM by 10.5.113.159 -
Changed line 5 from:
to:
June 01, 2017, at 06:31 AM by 45.56.3.173 -
Changed lines 9-10 from:
 Description: Next value that the estimator or controller would implement if CTRLMODE=3.
to:
 Description: Next value that the estimator or controller would
              implement if CTRLMODE=3.
June 01, 2017, at 06:31 AM by 45.56.3.173 -
Added lines 1-11:

(:title NXTVAL - APMonitor Option:) (:keywords NXTVAL, Optimization, Estimation, Option, Configure, Default, Description:) (:description Next value that the estimator or controller would implement if CTRLMODE=3.:)

 Type: Floating Point, Output
 Default Value: 1.0
 Description: Next value that the estimator or controller would implement if CTRLMODE=3.

The next value (NXTVAL) to be implemented by the controller. This is especially useful for a controller in WARM mode (CTRLMODE=2) where no values are changed on the first step (still in manual mode) but the control actions are computed beyond the first step. This is a useful mode to inspect the controller performance before it is turned on.