Main

SP - APMonitor Option

Main.OptionSp History

Hide minor edits - Show changes to output

Changed line 11 from:
The target value for a controller that is using a squared error objective (single trajectory track). The setpoint (SP) is the final target value.
to:
The target value for a controller that is using a squared error objective (single trajectory track). The setpoint (SP) is the final target value. SP is used with IMODE=3,6,9 when APM.CV_TYPE=2. SPHI and SPLO (range) are used with APM.CV_TYPE=1.
June 26, 2017, at 12:49 PM by 71.83.242.189 -
Changed line 13 from:
See also [[http://apmonitor.com/do/index.php/Main/ControllerObjective|Controller Objective]], [[Main/OptionSphi]], [[Main/OptionSplo]]
to:
See also [[http://apmonitor.com/do/index.php/Main/ControllerObjective|Controller Objective]], [[Main/OptionSphi|SPHI]], [[Main/OptionSplo|SPLO]]
June 26, 2017, at 12:49 PM by 71.83.242.189 -
Added lines 12-13:

See also [[http://apmonitor.com/do/index.php/Main/ControllerObjective|Controller Objective]], [[Main/OptionSphi]], [[Main/OptionSplo]]
June 08, 2017, at 10:40 PM by 10.5.113.159 -
Changed line 5 from:
%width=50px%Attach:cv.png
to:
%width=50px%Attach:cv.png [[Main/DbsVariable|Local Options]] | %width=30px%Attach:apm.png [[Main/DbsGlobal|Global Options]]
June 01, 2017, at 06:34 AM by 45.56.3.173 -
Added lines 1-11:
(:title SP - APMonitor Option:)
(:keywords SP, Optimization, Estimation, Option, Configure, Default, Description:)
(:description Set point for squared error model:)

%width=50px%Attach:cv.png

 Type: Floating Point, Input
 Default Value: 0.0
 Description: Set point for squared error model

The target value for a controller that is using a squared error objective (single trajectory track). The setpoint (SP) is the final target value.