From APMonitor Documentation

Main: SP - APMonitor Option

Local Options | Global Options
 Type: Floating Point, Input
 Default Value: 0.0
 Description: Set point for squared error model

The target value for a controller that is using a squared error objective (single trajectory track). The setpoint (SP) is the final target value. SP is used with IMODE=3,6,9 when APM.CV_TYPE=2. SPHI and SPLO (range) are used with APM.CV_TYPE=1.

See also Controller Objective, SPHI, SPLO

Retrieved from http://www.apmonitor.com/wiki/index.php/Main/OptionSp
Page last modified on October 30, 2017, at 08:18 PM