From APMonitor Documentation

Main: SPLO - APMonitor Option

Local Options | Global Options
 Type: Floating Point, Input
 Default Value: -1.0e20
 Description: Set point low for linear error model

The lower range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint low (SPLO) is the lower final target value. SPHI and SPLO are used with IMODE=3,6,9 when APM.CV_TYPE=1. The single set point SP is used with APM.CV_TYPE=2.

See also Controller Objective, SP, SPHI

Retrieved from http://www.apmonitor.com/wiki/index.php/Main/OptionSplo
Page last modified on October 30, 2017, at 08:18 PM