From APMonitor Documentation

Main: VLHI - APMonitor Option

Local Options | Global Options
 Type: Floating Point, Input
 Default Value: 1.0e20
 Description: Upper validity limit

VLHI is the upper validity limit for a measured value. Validity limits are one way to protect an application against bad measurements. This gross error detection relies on a combination of change values and absolute limits to determine when a measurement should be rejected. If VLHI is exceeded, the measured value is placed at VLHI or the maximum move allowed by VDVL when VLACTION=1. If VLACTION=0, there is no change in the measured value when a limit (VDVL, VLHI, VLLO) is exceeded.

See also VDVL, VLACTION, VLLO

Retrieved from http://www.apmonitor.com/wiki/index.php/Main/OptionVlhi
Page last modified on June 08, 2017, at 10:51 PM