Main

WSPHI - APMonitor Option

Main.OptionWsphi History

Show minor edits - Show changes to output

June 08, 2017, at 11:06 PM by 10.5.113.159 -
Changed line 14 from:
See also [[Main/Sphi|SPHI]], [[Main/Splo|SPLO]], [[Main/Wsplo|WSPLO]]
to:
See also [[Main/OptionSphi|SPHI]], [[Main/OptionSplo|SPLO]], [[Main/OptionWsplo|WSPLO]]
June 08, 2017, at 11:06 PM by 10.5.113.159 -
Changed lines 5-6 from:
%width=50px%Attach:cv.png
to:
%width=50px%Attach:cv.png [[Main/DbsVariable|Local Options]] | %width=30px%Attach:apm.png [[Main/DbsGlobal|Global Options]]
Added lines 13-14:

See also [[Main/Sphi|SPHI]], [[Main/Splo|SPLO]], [[Main/Wsplo|WSPLO]]
June 01, 2017, at 06:42 AM by 45.56.3.173 -
Changed lines 9-10 from:
 Description: Objective function weight on upper set point for linear error model
to:
 Description: Objective function weight on upper set point
             for linear error model
June 01, 2017, at 06:42 AM by 45.56.3.173 -
Added lines 1-11:
(:title WSPHI - APMonitor Option:)
(:keywords WSPHI, Optimization, Estimation, Option, Configure, Default, Description:)
(:description Objective function weight on upper set point for linear error model:)

%width=50px%Attach:cv.png

 Type: Floating Point, Input
 Default Value: 1.0
 Description: Objective function weight on upper set point for linear error model

A weighting factor to penalize deviation above the upper setpoint trajectory with final target SPHI. If there is no penalty to cross the upper setpoint, WSPHI can be set to zero.