NEWVAL - APMonitor Option
Main.OptionNewval History
Show minor edits - Show changes to output
Changed line 5 from:
%width=50px%Attach:fv.png %width=50px%Attach:mv.png
to:
%width=50px%Attach:fv.png %width=50px%Attach:mv.png [[Main/DbsVariable|Local Options]] | %width=30px%Attach:apm.png [[Main/DbsGlobal|Global Options]]
Changed lines 9-10 from:
Description: New value implemented by the estimator or controller (NEWVAL = MEAS when not in control)
to:
Description: New value implemented by the estimator or
controller (NEWVAL = MEAS when not in control)
controller (NEWVAL = MEAS when not in control)
Added lines 1-11:
(:title NEWVAL - APMonitor Option:)
(:keywords NEWVAL, Optimization, Estimation, Option, Configure, Default, Description:)
(:description New value implemented by the estimator or controller (NEWVAL = MEAS when not in control):)
%width=50px%Attach:fv.png %width=50px%Attach:mv.png
Type: Floating Point, Output
Default Value: 1.0
Description: New value implemented by the estimator or controller (NEWVAL = MEAS when not in control)
The new value of the parameter estimate (FV) or manipulated variable (MV). This value is taken from the first step of the controller or the last step of the estimator. The NEWVAL is set equal to the measured value if the FV or MV status is off and the FSTATUS (feedback status) is ON (1).
(:keywords NEWVAL, Optimization, Estimation, Option, Configure, Default, Description:)
(:description New value implemented by the estimator or controller (NEWVAL = MEAS when not in control):)
%width=50px%Attach:fv.png %width=50px%Attach:mv.png
Type: Floating Point, Output
Default Value: 1.0
Description: New value implemented by the estimator or controller (NEWVAL = MEAS when not in control)
The new value of the parameter estimate (FV) or manipulated variable (MV). This value is taken from the first step of the controller or the last step of the estimator. The NEWVAL is set equal to the measured value if the FV or MV status is off and the FSTATUS (feedback status) is ON (1).