Main

SP - APMonitor Option

Main.OptionSp History

Hide minor edits - Show changes to markup

Changed line 11 from:

The target value for a controller that is using a squared error objective (single trajectory track). The setpoint (SP) is the final target value.

to:

The target value for a controller that is using a squared error objective (single trajectory track). The setpoint (SP) is the final target value. SP is used with IMODE=3,6,9 when APM.CV_TYPE=2. SPHI and SPLO (range) are used with APM.CV_TYPE=1.

June 26, 2017, at 12:49 PM by 71.83.242.189 -
Changed line 13 from:

See also Controller Objective, OptionSphi, OptionSplo

to:

See also Controller Objective, SPHI, SPLO

June 26, 2017, at 12:49 PM by 71.83.242.189 -
Added lines 12-13:

See also Controller Objective, OptionSphi, OptionSplo

June 08, 2017, at 10:40 PM by 10.5.113.159 -
Changed line 5 from:
to:
June 01, 2017, at 06:34 AM by 45.56.3.173 -
Added lines 1-11:

(:title SP - APMonitor Option:) (:keywords SP, Optimization, Estimation, Option, Configure, Default, Description:) (:description Set point for squared error model:)

 Type: Floating Point, Input
 Default Value: 0.0
 Description: Set point for squared error model

The target value for a controller that is using a squared error objective (single trajectory track). The setpoint (SP) is the final target value.